Author DIY tire mounting and balancing  (Read 1067 times)

0 Members and 1 Guest are viewing this topic.

  • Offline ajay   us

    • XR Member  ‐    14
    • **
    • Topic Author

    Offline ajay

    • XR Member
    • **
    • Topic Author
    • Posts: 14
    • Country: us
    DIY tire mounting and balancing
    on: March 22, 2022, 01:36:33 pm
    March 22, 2022, 01:36:33 pm
    Has anyone mounted and balanced tires themselves. I've read that BMWs have a larger hole through the center of the wheel and therefore don't work with many wheel balancers.

    Does anyone know the diameter of the hole through the hub or know whether this product would work?

    https://www.amazon.com/gp/product/B0068FUWGI/

  • Offline rcb78   us

    • XR Master  ‐    903
    • ****
      #1

    Offline rcb78

    • XR Master
    • ****
    • Posts: 903
    • Country: us
    Re: DIY tire mounting and balancing
    Reply #1 on: March 22, 2022, 02:13:15 pm
    March 22, 2022, 02:13:15 pm
    The BMW wheels with the big holes are the ones with belt or shaft drives where the wheels bolt to the hubs.  Our bikes have the hub integral to the wheel which means they work fine without special adapters.

  • Offline ajay   us

    • XR Member  ‐    14
    • **
    • Topic Author
    • #2

    Offline ajay

    • XR Member
    • **
    • Topic Author
    • Posts: 14
    • Country: us
    Re: DIY tire mounting and balancing
    Reply #2 on: March 22, 2022, 02:22:26 pm
    March 22, 2022, 02:22:26 pm
     :763:

     



    strongminded