Author Topic: Handle Bar Risers.  (Read 3158 times)

0 Members and 3 Guests are viewing this topic.

Offline CWMC29

  • XR Member
  • **
  • Posts: 16
  • Town / City: Windsor, ON, CND
  • Country: ca
Re: Handle Bar Risers.
Reply #10 on: December 09, 2020, 11:43:06 PM
*Originally Posted by sparky12353 [+]
sorry it's taken a bit of time to get back to you yes fitted and re-routed the clutch cable with no issues, and yes much better for me now with no problems to my wrist  happy days people :062: :062: :062: :062: :062: :062:

Sparky12353... Can you take some pics of how you re-routed the clutch cable for me please and post it.  I'll be looking into them in the near future.  Thanks

Offline Astro

  • XR Pro
  • ***
  • Posts: 52
  • Country: au
Re: Handle Bar Risers.
Reply #11 on: February 05, 2021, 12:09:05 AM
I did 350klms two up yesterday. Ordered a set of Wunderlich 20mm risers last night. I looked at 25 and 30mm , with and without offsets. But I don't think I need much to make it comfortable and I don't want the bars too much closer as it will cramp my elbows up.
I'll let you know once fitted how they feel.👍

Offline Rinkydink

  • XR Pro
  • ***
  • Posts: 94
  • Country: us
Re: Handle Bar Risers.
Reply #12 on: February 06, 2021, 10:11:51 PM
I just ordered the Hornig 25mm risers with no offset. I want to use a tank bag and figure I need to compromise to save valuable space.
Watch out for blue haired women in big cars.

Offline Astro

  • XR Pro
  • ***
  • Posts: 52
  • Country: au
Re: Handle Bar Risers.
Reply #13 on: February 08, 2021, 12:33:24 AM
Wunderlich 20mm risers arrived this morning and just installed. Finish is slightly different to the OEM mounts. But not so much that it's an eyesore. I'm happy I only went for the 20mm rise, as I think any more would have had the cockpit too cramped. Cables don't require re routing. Wunderlich replacement Bolts have T40 heads rather than T35. Had to slightly adjust the ram mount with the handwheel so it didn't touch the OEM tankbag at full left lock. That was it. Took all of 5min including getting the tools out and put away.
So far, everything I've done on the bike has been fairly simple to do. Very Cherman even.......

Offline Astro

  • XR Pro
  • ***
  • Posts: 52
  • Country: au
Re: Handle Bar Risers.
Reply #14 on: February 10, 2021, 10:36:31 PM
Did 350k's yesterday with the risers fitted. I'm 5'11" and the 20mm rise was right for me. Not too high or too close. Goldilocks.👍

Offline Royinspain

  • XR Pro
  • ***
  • Posts: 136
  • Country: es
Re: Handle Bar Risers.
Reply #15 on: February 11, 2021, 04:25:21 PM
*Originally Posted by LP17 [+]
Thank you Dave and Sparky.  :763:
Dave is worried that the ones you are talking about Sparky may be too far up and back and the clutch cable may be too stretched.
Did you fit them successfully to your F900 XR Sparky? I am talking about the 30mm up and 25 mm back. The ones you purchased
Dave will not ship to Australia.
Cheers Leon
If you look at the Horning site it specifically shows that you need to unclip the clutch cable...

Offline Royinspain

  • XR Pro
  • ***
  • Posts: 136
  • Country: es
Re: Handle Bar Risers.
Reply #16 on: February 11, 2021, 04:27:41 PM
*Originally Posted by sparky12353 [+]
sorry it's taken a bit of time to get back to you yes fitted and re-routed the clutch cable with no issues, and yes much better for me now with no problems to my wrist  happy days people :062: :062: :062: :062: :062: :062:
You simply unclipped the clutch cable as and where Hornig suggest?
Will get them ordered straight away.

Offline Royinspain

  • XR Pro
  • ***
  • Posts: 136
  • Country: es
Re: Handle Bar Risers.
Reply #17 on: March 22, 2021, 11:48:55 AM
*Originally Posted by sparky12353 [+]
sorry it's taken a bit of time to get back to you yes fitted and re-routed the clutch cable with no issues, and yes much better for me now with no problems to my wrist  happy days people :062: :062: :062: :062: :062: :062:
The ones you fitted are the Hornig 30mm up /25mm back Sparky? Cheers

Offline Rinkydink

  • XR Pro
  • ***
  • Posts: 94
  • Country: us
Re: Handle Bar Risers.
Reply #18 on: March 22, 2021, 02:03:19 PM
I just installed my Hornig risers. Unclipped the clutch cable as instructed. Very pleased.

Watch out for blue haired women in big cars.

Offline Royinspain

  • XR Pro
  • ***
  • Posts: 136
  • Country: es
Re: Handle Bar Risers.
Reply #19 on: March 22, 2021, 04:50:09 PM
*Originally Posted by Rinkydink [+]
I just installed my Hornig risers. Unclipped the clutch cable as instructed. Very pleased.


The 20mm, 30 mm or 30mm up h 25mm back?